How To Apply Our Transfers

1) No Teflon Sheets, Covers or Pillows. Ever.

Never use teflon sheets, covers or pillows with any of our plastisol formulas. They dissipate the heat too much, resulting in a poorly applied transfer.

2) Calibrate Your Heat Press.

You will need to use a quality Infrared (IR) Temperature Gun (Contactless) to ensure your heat press is heating evenly and accurately. You should do this each and every time you start a new pressing cycle.

3) Pressure, Pressure, Pressure.

Plastisol transfers will give you a quality and long-lasting decoration solution, but you HAVE to ensure you are using adequate and even pressure. This will ensure the formula properly adheres to your garment. Not using enough pressure can result in poorly applied plastisol transfers.

It is not required but we always pre-pres our shirts for the same tempararute

1/2 Colors (all transfers have specific instructions for them on the product description)

NO TEFLON SHEETS, COVERS or PILLOWS 

Temperature: 385 Degrees Fahrenheit 
(OPTIONAL) PrePress: 7 Seconds   
Time: 7 Seconds   
Pressure: Max Pressure (8-9 Manual, 60PSI Automatic)   
Peel: Hot Peel

 

Full Color

NO TEFLON SHEETS, COVERS or PILLOWS 

Temperature: 335 Degrees Fahrenheit  
(OPTIONAL) PrePress: 7 Seconds   
Time:   7 Seconds  
Pressure: High Pressure (8-9 Manual, 60PSI Automatic)  
Peel: Hot Peel

 

Sublimation

COVER WITH 1-2 TEFLON SHEETS; BE SURE TO PLACE A SHEET INSIDE THE SHIRT TO PREVENT THE IMAGE FROM PASSING THROUGH

Temperature: 400 Degrees Fahrenheit   
(OPTIONAL) PrePress: 15 Seconds   
Time: 60 Seconds   
Pressure: Medium Pressure (6-8 Manual, 50PSI Automatic)   
Peel: Hot Peel