Product Details
Gorgeous pearl and rhinestone BRIDE patch.
PRESSING INSTRUCTIONS FOR THESE PATCHES
We recommend using a press that heats from the bottom! Top heat will melt the pearls.
For these hats covered the patch with a cloth to protect the pearls from scuffing and then pressed as follows:
320 degrees heat from the bottom for 90 seconds. A 2nd press may be required if some of your edges did not stick.
Due to the many variations in monitors and browsers, colors may appear different on different monitors. Computer monitors are not all calibrated equally and color reproduction on the Internet is not precise. With these factors in mind we cannot guarantee your transfers will match 100% from batch to batch or to the colors you see on your computer monitor. We do our very best to ensure all settings are repeated with each batch but please allow for some variances to occur.
** A HEAT GUN WILL TELL YOU IF YOUR PRESS IS ACCURATE **
PRESSURE TEST: https://www.silhouetteschoolblog.com/2018/02/heat-press-pressure-test-paper-or.html
Every Heat Press is different, temps and pressure are not always accurate or even so adjusting for your individual press is necessary, we highly recommend a heat gun. WE ARE NOT RESPONSIBLE FOR ANY PRESSING ISSUES DUE TO INACCURATE TEMPERATURE OR PRESSURE.
