Paisley Patterned State Turquoise Faux Leather Patch
- Faux leather
- Patches are 2" tall or 3" wide depending on the state chosen.
- Comes with adhesive backing that requires a heat press to adhere patches to fabric.
PRESSING INSTRUCTIONS
Every Heat Press is different, temps and pressure are not always accurate or even so adjusting for your individual press is necessary, we highly recommend a heat gun. WE ARE NOT RESPONSIBLE FOR ANY PRESSING ISSUES DUE TO INACCURATE TEMPERATURE OR PRESSURE.
These instructions are based on settings using a Hotronix Fusion with dual heated platens. If using a single platen, you may need to adjust time and temperature settings.
- 320 Degrees
- REMOVE PROTECTIVE PAPER BACKING FROM PATCH
- Place patch and then cover with teflon or kraft paper
- Press for 20 seconds, Let cool to allow adhesive to lock in