Product Details
Shirt: CC 1717 Ivory
DTF Heat Transfer, this can be applied to any combination of polyester/cotton, including 100% cotton.
This design brings a hauntingly cool vibe to life with a detailed skeleton figure holding a vintage camera, dressed in a red and white striped jacket for a striking pop of color. The bold "No Filter" graphic and classic tongue logo add a rebellious edge, while the crescent moon and dark circular background create a mysterious, rock-inspired feel. The hand-drawn style mixed with graphic elements gives it an effortlessly edgy, retro vibe that’s perfect for music lovers and trendsetters alike.
Formula:
DTF FORMULA
|
ADULT
|
11.5" WIDE OR UP TO 12.75" TALL FOR MORE NARROW DESIGNS
|
|
YOUTH
|
10” WIDE OR UP TO 10.5”TALL FOR MORE NARROW DESIGNS
|
|
TODDLER
|
8” WIDE OR TALL DEPENDING ON DESIGN
|
|
INFANT
|
6” WIDE OR TALL DEPENDING ON DESIGN
|
|
LARGE POCKET
|
5” WIDE OR TALL DEPENDING ON DESIGN
|
|
CAN HUGGER
|
3” WIDE OR TALL DEPENDING ON DESIGN
|
|
HAT
|
3” TALL 5" WIDE DEPENDING ON DESIGN
|
DTF FORMULA PRESSING INSTRUCTIONS
- 275-300 degrees;
- HEAVY PRESSURE 8-9 PSI.
- Pre press for 7 seconds to remove wrinkles and moisture;
- Press for 8-15 seconds; LET COOL THEN PEEL
- Press again for 8 seconds, with a parchment paper covering the design for protection (you don' have to cool again before removing the covering on the repress)
Due to the many variations in monitors and browsers, colors may appear different on different monitors. Computer monitors are not all calibrated equally and color reproduction on the Internet is not precise. With these factors in mind we cannot guarantee your transfers will match 100% from batch to batch or to the colors you see on your computer monitor. We do our very best to ensure all settings are repeated with each batch but please allow for some variances to occur.
** A HEAT GUN WILL TELL YOU IF YOUR PRESS IS ACCURATE **
PRESSURE TEST: https://www.silhouetteschoolblog.com/2018/02/heat-press-pressure-test-paper-or.html
Every Heat Press is different, temps and pressure are not always accurate or even so adjusting for your individual press is necessary, we highly recommend a heat gun. WE ARE NOT RESPONSIBLE FOR ANY PRESSING ISSUES DUE TO INACCURATE TEMPERATURE OR PRESSURE.
