Thinking Cap Sublimation Transfer

 

Thinking Cap sublimation heat press transfer.

Sublimation transfers require a material that is at least 50% polyester. The higher the count the brighter the image will be. * Please keep in mind this is a mockup

How To Apply

• Temp: 400 degrees
• Pre-press your garment for 15 seconds
• Press for 60 seconds
• Cover with parchment paper

Formula:

Sublimation

SUBLIMATION PRESSING INSTRUCTIONS

Please do your research and understand how the process of sublimation works. It requires a polyester material and light colored material. Depending on your shirt material you may need to adjust your heat, some fabrics scorch easier than others.

• 385-400 degrees;
• Pre press for 7 seconds;
• Press for 45-60 seconds.
• Cover with parchment paper, thread shirt or place parchment paper inside shirt to prevent dye migration.

Due to the many variations in monitors and browsers, colors may appear different on different monitors. Computer monitors are not all calibrated equally and color reproduction on the Internet is not precise. With these factors in mind we cannot guarantee your transfers will match 100% from batch to batch or to the colors you see on your computer monitor. We do our very best to ensure all settings are repeated with each batch but please allow for some variances to occur.

** A HEAT GUN WILL TELL YOU IF YOUR PRESS IS ACCURATE **

PRESSURE TEST:  https://www.silhouetteschoolblog.com/2018/02/heat-press-pressure-test-paper-or.html

Every Heat Press is different, temps and pressure are not always accurate or even so adjusting for your individual press is necessary, we highly recommend a heat gun. WE ARE NOT RESPONSIBLE FOR ANY PRESSING ISSUES DUE TO INACCURATE TEMPERATURE OR PRESSURE.