USA Faux Sequins DTF Heat Transfer

Shirt: BC 3001CVC Heather Blue

DTF Heat Transfer, this can be applied to any combination of polyester/cotton, including 100% cotton.

This USA DTF transfer brings a bold and sparkly twist to patriotic wear! With faux glitter chunky block letters filled with an American flag print layered over a map silhouette, this design blends red, white, and blue in the best way possible. It’s simple, strong, and seriously cute—just what shirt makers need to round out their summer and 4th of July collections. Whether your customers are celebrating at the parade, lighting fireworks, or just showing off their love for the red, white, and blue, this one’s ready to go.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Formula:

DTF FORMULA

DTF FORMULA PRESSING INSTRUCTIONS

• 275-300 degrees; 
• HEAVY PRESSURE 8-9 PSI. 
• Pre press for 7 seconds to remove wrinkles and moisture;
• Press for 8-15 seconds; LET COOL THEN PEEL
• Press again for 8 seconds, with a parchment paper covering the design for protection (you don' have to cool again before removing the covering on the repress)

Due to the many variations in monitors and browsers, colors may appear different on different monitors. Computer monitors are not all calibrated equally and color reproduction on the Internet is not precise. With these factors in mind we cannot guarantee your transfers will match 100% from batch to batch or to the colors you see on your computer monitor. We do our very best to ensure all settings are repeated with each batch but please allow for some variances to occur.

** A HEAT GUN WILL TELL YOU IF YOUR PRESS IS ACCURATE **

PRESSURE TEST:  https://www.silhouetteschoolblog.com/2018/02/heat-press-pressure-test-paper-or.html

Every Heat Press is different, temps and pressure are not always accurate or even so adjusting for your individual press is necessary, we highly recommend a heat gun. WE ARE NOT RESPONSIBLE FOR ANY PRESSING ISSUES DUE TO INACCURATE TEMPERATURE OR PRESSURE.