USA Patterned Retro DTF Heat Transfer

Shirt: CC 9018 Blue Jean
Hat: Otto

DTF Heat Transfer, this can be applied to any combination of polyester/cotton, including 100% cotton.

Show off your stars & stripes with this retro-inspired USA design! Featuring mixed patterns like checks and stripes, this playful transfer is full of sparkle and pride. A must-have for Memorial Day, July 4th, or every day in between.

DTF FORMULA PRESSING INSTRUCTIONS

• 275-300 degrees; 
• HEAVY PRESSURE 8-9 PSI. 
• Pre press for 7 seconds to remove wrinkles and moisture;
• Press for 8-15 seconds; LET COOL THEN PEEL
• Press again for 8 seconds, with a parchment paper covering the design for protection (you don' have to cool again before removing the covering on the repress)

• ADULT: 11.5" wide or up to 12.75" tall for narrow designs
• YOUTH: 10" wide or up to 10.5" tall for narrow designs
• TODDLER: 8" wide or tall depending on design
• INFANT: 6" wide or tall depending on design
• LARGE POCKET: 5" wide or tall depending on design
• CAN HUGGER: 3" wide or tall depending on design
• HAT: 3" tall, 5" wide depending on design

Due to the many variations in monitors and browsers... (content remains the same)

** A HEAT GUN WILL TELL YOU IF YOUR PRESS IS ACCURATE **

PRESSURE TEST: Click Here

Every Heat Press is different... WE ARE NOT RESPONSIBLE FOR ANY PRESSING ISSUES...