New

Jesus & Baseball Red Stripes Puff Screen Print Transfer

Jesus & Baseball Red Stripes Puff Screen Print Transfer

$5.50

Hurry up! only left

Current Stock:

Quantity:

Adding to cart… The item has been added

Two things that just make sense.

This “Jesus and Baseball” design uses a puff screen print transfer for a bold, slightly raised finish that gives the graphic extra depth without overdoing it.

Clean, strong, and easy to wear for game days, practices, or everyday life.

PRODUCT TYPE

This is a SCREEN PRINT TRANSFER — not a finished shirt

Made for:

Boutique owners
Shirt makers
DIY apparel brands
Print shops

You press it. You brand it. You sell it.

PRESSING INSTRUCTIONS (IMPORTANT)

Temp: 350°F
Time: 10–15 seconds
Pressure: Medium to firm
Peel: Hot peel

Size: 9X12.75"

Mockup: Comfort Colors Chambray 1717 - Blue Jean

Formula:

HIGH HEAT FORMULA

HIGH HEAT FORMULA PRESSING INSTRUCTIONS

** Recommended for 100% Cotton Shirts, if polyester is present thread the shirt or place parchment paper inside to prevent any transferring through the shirt ** HIGH POLYESTER material is NOT recommended for these transfers.

These REQUIRE AN ACCURATE PRESSURE AND TEMPERATURE, they are a much softer transfer, but are not as user friendly as the low heat formula. YOU MUST USE A HEAT GUN TO TEST THE ACCURACY OF YOUR PRESS PRIOR TO PRESSING.

350 degrees;
IF YOUR USING A BUDGET PRESS (UNDER $600) we recommend increasing your heat by 10-20 degrees.
HEAVY PRESSURE 8-9 PSI.
Pre press for 7 seconds to remove wrinkles and moisture;
Press for 7-12 seconds; HOT PEEL.
No teflon, covers, pillows; you MAY need to make an exception AND USE A PRESSING PILLOW if you have problems obtaining a high enough pressure setting.
PEEL SLOWLY, IF IT IS STICKING INCREASE YOUR HEAT AND PRESS IT AGAIN UNTIL IT PEELS EASILY. IF THE PRINT IS DULL IT WAS PRESSED TOO HOT, IF IT IS STICKING YOUR HEAT IS NOT HIGH ENOUGH.