Skull POCKET/CAN HUGGER Screen Print Heat Transfer
Skull POCKET/CAN HUGGER Screen Print Heat Transfer
Skull POCKET/CAN HUGGER Screen Print Heat Transfer
Skull POCKET/CAN HUGGER Screen Print Heat Transfer
Skull POCKET/CAN HUGGER Screen Print Heat Transfer
Skull POCKET/CAN HUGGER Screen Print Heat Transfer

HAPPY CUSTOMERS

Read All Reviews

Skull HAT/CAN HUGGER Screen Print Heat Transfer


$4.25
Hurry up! only left
Adding to cart… The item has been added

Skull With Bun 

Plastisol Ink Screen Print Transfer, this can be applied to any combination of polyester/cotton, including 100% cotton.

 

Size: 2.75" X 3.7" POCKET/CAN HUGGER/MASK
How To Apply:

Due to the many variations in monitors and browsers, colors may appear different on different monitors. Computer monitors are not all calibrated equally and color reproduction on the Internet is not precise.


In addition Screen Print transfers are made with a squeegee and wet ink, this process leaves room for variances such as percentages of color, squeegee speed ,and squeegee pressure.


With these factors in mind we cannot guarantee your transfers will match 100% from batch to batch or to the colors you see on your computer monitor. We do our very best to ensure all settings are repeated with each batch but please allow for some variances to occur.

Formula:
1/2 COLOR FORMULA


1/2 COLOR FORMULA PRESSING INSTRUCTIONS

Recommended for 100% Cotton. If using a polyester mix, thread the shirt or place parchment paper inside the shirt to prevent dye migration. High Polyester count materials are NOT recommended

These REQUIRE AN ACCURATE PRESSURE AND TEMPERATURE, they are a much softer transfer, but are not as user friendly as the low heat formula. YOU MUST USE A HEAT GUN TO TEST THE ACCURACY OF YOUR PRESS PRIOR TO PRESSING.

  • 375/385 degrees
  • IF YOUR USING A BUDGET PRESS (UNDER $600) we recommend increasing your heat by 10-20 degrees.
  • HEAVY PRESSURE 8-9 PSI. 
  • Pre press for 7 seconds to remove wrinkles and moisture;
  • Press for 7-12 seconds; HOT PEEL.
  • No teflon, covers, pillows; you MAY need to make an exception AND USE A PRESSING PILLOW if you have problems obtaining a high enough pressure setting.
  • PEEL SLOWLY, IF IT IS STICKING INCREASE YOUR HEAT AND PRESS IT AGAIN UNTIL IT PEELS EASILY. IF THE PRINT IS DULL IT WAS PRESSED TOO HOT, IF IT IS STICKING YOUR HEAT IS NOT HIGH ENOUGH.

Due to the many variations in monitors and browsers... (content remains the same)

** A HEAT GUN WILL TELL YOU IF YOUR PRESS IS ACCURATE **

PRESSURE TEST: Click Here

Every Heat Press is different... WE ARE NOT RESPONSIBLE FOR ANY PRESSING ISSUES...

Skull POCKET/CAN HUGGER Screen Print Heat Transfer

Skull HAT/CAN HUGGER Screen Print Heat Transfer

$4.25